|
Search Active Lifting:
 |
Stainless Steel Wire Rope Terminations
| |||||||||||||||||||||||
THESE SAMPLES HAVE BEEN ASSEMBLED USING 1/8" (3mm) OR 5/32" (4mm) WIRE ROPE. (Other sizes are available) |
||
| 1 TURNBUCKLE EYE & EYE WITH SADDLE Popular economical and simple method. Easy to assemble on site. |
 |
SWAGGED EYE WITH SADDLE Simple termination and anchor point. Used mostly with system 1 and 2. |
| 2 TURNBUCKLE OR BOTTLESCREW JAW & JAW Variation of system 1, suitable for attaching to a fixed eye anchor point. Shown here attached to a screw eye. |
 |
SWAGED EYE & EYE BOLT Simplest of all methods if posts are not thick. Bolt passes through post and is tightened to tension wire. Use this system at both ends. |
| 3 TURNBUCKLE JAW & SWAGE TERMINAL Traditional style with aesthetic appearance. Body is 316 grade. |
 |
JAW END SWAGE TERMINAL Termination usually used with systems 3 and 4. Can be attached to fixed eye anchor points. |
| 4 BOTTLESCREW JAW & SWAGE TERMINAL Streamlined and modern in appearance. |
 |
TOGGLE SWAGE TERMINAL Usually used with system 5. Also very good when alignment is a problem. |
| 5 RIGGING SCREW TOGGLE & SWAGE TERMINAL High quality fitting. Body is chrome plated bronze. Expensive but has excellent corrosion resistance. |
 |
THREADED SWAGE TERMINALS Neater variation of above. Useful if posts are too thick for eye bolts. |
| 6 HOOK & EYE TURNBUCKLE (ALSO AVAIL. HOOK & HOOK) Shown here with eye plate and wire rope grips. Not as neat as swaging but does not require special tools. |
 |
SWAGED EYE WITH THIMBLE Shown here with slotted head shackle and screw eye. Can be used with most anchor points. |
Always ensure that the anchoring system you use is strong enough for the job!
Check your local building codes to ensure you comply with the relevant legislation.
This is a short form you can submit to request information from Active Lifting:
